Cone Set for Live Center

$69.00

This accessory to the Robust Precision Live Center includes a large cone that is 4” in diameter and a smaller point cone that is 1.25” diameter.

In stock (can be backordered)

Robust Precision Live Center

Made in the USA.  The cup center is threaded 3/4‐10 for standard accessories.  A 5/16” center pin in a thru hole, which can accommodate drilling, can be extended or reversed. The #2 Morse Taper shank is tapped 3/8-16 for draw bar applications.

Description

The Cone Set for Live Center consists of the two aluminum pieces.  The aluminum pieces are threaded ¾-10 and will fit other common live centers with the same threading. The large cone is 4” in diameter, and the smaller point is 1.25” diameter.

The small point cone has a 60 degree tip which is typical for a live center point. This aluminum cone has a small foot print which allows for close work at the tailstock end.

The large 4″ cone has a 45 degree slope on the outside and a 60 degree slope on the inside. Using the large cone allows for mounting a large opening of a hollow form turning. Reversing the large cone allows for centering  larger turning between centers or for stabilizing a turning in a chuck.

Additional information

Weight0.6 lbs
Dimensions5 × 5 × 2.25 in

You may also like…